Advantages of turbocharger

A turbocharger is the mechanical device that increases the flow of air in the engine, runs on waste exhaust gasses or we can say that it derives its energy from exhaust gasses that usually get wasted in the naturally aspirated engine. Let us have a deep insight into the advantages provided by the turbocharger. 

Advantages of the turbocharger :

• The most obvious advantage of getting a turbocharged engine in your vehicle is that you are going to have a much faster, much more powerful ride.
• The maximum power of the engine with a great turbocharger increased by 40% or more compared with a supercharger system without the turbocharger.
• Turbochargers can spin much faster.
• Superchargers are parasitic, they eat parts of power produced by an engine.
• Most turbochargers are electronically driven to eliminate turbo lag.
• Turbochargers recycle energy produced by engines by transforming more exhaust gas energy into power output with lower thermal and frictional losses.
• Turbochargers supplied more air mass into the engine's combustion chamber so the combustion is easier, plain and also emission is lower. As a result, the turbocharged diesel engines have about 50 per cent lower CO2 and NOx emissions compared to naturally aspirated engines.
• Turbochargers delivered more power output, which transforms in improvement vehicle’s performance on a road and makes driving enjoyable.
• The turbocharger itself acts as an additional silencer.

Advantages of rear wheel drive

The most common layout for a rear-wheel-drive is the car mounted longitudinally with the engine and transmission at the front of the car. Some other rear-wheel-drive car layouts include front-mid, rear-mid and rear engines. Let us have a deep insight into the advantages of cars mounted with real wheel drive. 

Advantages of rear-wheel drive :

• Better weight balance and distribution.
• Better acceleration.
• Better mass distribution front to rear axles.
• Better road holding and stopping.
• No torque steer.
• Better ride and feel.
• Better serviceability.
• Costs are reduced because manufacturing is simple as compared to FWD. 
• Steering and traction are not through the same front wheels thus better tire life. 
• Traction capacity increases as you accelerate because the rear wheel is the dynamic weight transfer.
• RWD car accelerates faster than an FWD.
• Less costly and easier maintenance.
• Rear-wheel drive puts the wheels which are pulling the load closer to the point where a trailer articulates, helping to steer, especially for large loads.
• Better handling in dry condition.
• More predictable steering in low traction condition. 
• Possible to turn them further than would be front-wheel drive resulting in a smaller steering radius. 
• Weight transfer during acceleration. 

Advantages of diesel engine

The diesel engine is an internal combustion engine in which air is compressed at a high temperature and ignite the fuel which is injected into the combustion chamber, where a piston is actuated by combustion and expansion thus transforms the chemical energy into mechanical energy that used in various automobile vehicles. Let us have a deep insight into the advantages provided by a diesel engine. 

Advantages of diesel engine :

• The diesel engine offers the best class mileage. 
• A diesel engine has 25 to 30 % better fuel economy than a petrol engine.
• The engine is stronger and offers more horsepower. 
• Less pollution.
• Diesel is better efficient available fuel and it is energy-dense and durable than petrol fuel.
• Diesel engine free to spark plug it helps in avoiding the elimination of ignition tune-ups.
• Can use alternative fuel like bio diesel.
• It is much safer in accidents because diesel does not evaporate as easy as petrol. 
• Carbon monoxide and unburnt hydrocarbons do not form in the crevices of the cylinder wall because the diesel engine only compresses air. 
• Produce maximum torque at low engine speed. 
• Easier to turbocharge and supercharge a diesel engine. 
• No sparking as the fuel auto-ignites thus no spark plugs or spark wires required. 
• They can be run on synthetic fuel easily. 

Advantages of petrol engine

A petrol engine is an internal combustion engine made for converting heat into mechanical energy which is generated by spark ignition of petrol. Generally, petrol and air are usually mixed after compression stroke. There are four strokes in two revolutions of the piston such as suction, compression, expansion and exhaust. Let us have a deep insight into the advantages provided by the petrol engine. 

Advantages of a petrol engine :

• The petrol engine is cheaper than the diesel engine to purchase.
• Less noise and vibration and service and maintenance cost are less too.
• The engine works smooth its light and easy to drive.
• Power output is good.
• It can be easily retrofitted for alternative fuel like CNG and LPG.
• Low emissions hence environment-friendly engine.
• The petrol has a higher energy density than almost any other form of energy.
• Despite its explosiveness and flammability, it’s relatively easy and safe to store and easily carry around in cars.

Advantages of all wheel drive

An all-wheel-drive vehicle is one with a powertrain that can supply power to all its wheels, whether full-time or on-demand. Let us have a deep insight into the advantages provided by car used to all-wheel drive.

Advantages of all-wheel drive :

• Excellent traction in all kinds of weather.
• For transmitting driving forces, AWD vehicles have twice the grip available.
• Stability and degree of driver control are greater than RWD and FWD.
• Easily the most versatile drive train arrangement.
• Most AWD systems primarily deliver power to one set of front or rear wheels. The power is diverted to the other axle when slippage is detected at one axle.
• AWD is Entirely automatic driver does not need to manually engage four-wheel drive.
• Best choice for inclement weather and also works well on dirt and mud.
• It provides improved handling and better tire grip in sudden panic swerves.

Advantages of glass reinforced plastic

Reinforced plastic has more strength and high resistance against weather, thus finding its use in outdoor applications and other many applications so it allows many advantages. Let us have a deep insight into the advantages of glass-reinforced plastic.

Advantages of glass-reinforced plastic :

• Glass can be easily drawn into the fibre from the molten state.
• Glass is cheaper and readily available.
• Glass fibre is relatively strong.
• In terms of plastic matrix materials, glass is chemically inert.
• One of the main reasons for using glass-reinforced is the fact that it does not conduct electricity.
• Resistant to corrosion.
• In its weight-to-potency ratio, glass-reinforced plastic is found.
• High strength plays a vital role when it comes to designing man load-bearing structures and glass-reinforced fulfils this need.
• Compared to other corrosion-resistant materials like titanium and stainless steel, it is very affordable.
• Glass-reinforced plastic has a high strength to weight ratio and high flexural strength making it an attractive lightweight material that builds strength into almost any finished component or product.
• The unique physical properties of glass-reinforced plastic make it extremely flexible meaning that almost any specifications can be easily tooled, moulded and manufactured.
• It probably won't corrode so you may not even have to finish it by painting it, just have the plastic producer dye it for you.
• It does not expand or contract anything like steel does.
• Glass-reinforced plastic will weight half the weight of aluminium and seventh of steel.
• Low transport cost.
• Long effective service life.
• Variety of joint system.
• Better hydraulic performance.

Advantages of MPFI system

MPFI state as a multi-point fuel injection system. The main function of the MPFI system is to supply a proper ratio of gasoline and air to the cylinders. Let us have a deep insight into the advantages of this system in this article.

Advantages of the MPFI system :

• MPFI improved fuel consumption.
• Mileage will be improved.
• ECM technique is used to control the engine.
• Precise supply of air-fuel mixture.
• The engine response is also good in the condition of the throttle applied.
• The MPFI engines vibrate less and don’t require to be cranked twice or thrice in cold weather.
• It helps in uniform combustion of fuel inside the combustion chamber.
• The exact and uniform quantity of the air-fuel mixture is provided for each cylinder.
• Cleaner emissions.
• MPFI improves the functionality and durability of the engine components.
• The mileage of the vehicle is improved. 

Advantages of eddy current dynamometer

Eddy current dynamometer used to measure the torque and power of the engine. It works on the principle of generating eddy current which opposes the change in magnetic flux. Let us have a deep insight into the advantages provide by eddy current dynamometer. 

Advantages of eddy current dynamometer : 

• Relatively higher torque under low-speed conditions.
• No size limit it can be large or small.
• It can be capable of measuring high power per unit weight of the dynamometer.
• It does not have intricate rotating parts except shaft bearing.
• The development of eddy current is smooth and therefore the torque under almost all conditions is smooth and continuous as well.
• Easy to control and operate.

Advantages of annealing

Annealing is a process by changing its crystalline structure by softening the metal you work with by heating and air cooling, most steels can be annealed, but other metals have more complex or varied processes to do so. Let us have a deep insight into the advantages of annealing in this article. 

Advantages of annealing :

• It softens the metal.
• It reduces thermal stresses which occur due to a temperature gradient.
• It enhances and improves the machinability of steel.
• It increases the ductility of the metal.
• It enhances the toughness of metal.
• It improves the homogeneity in metal.
• The grain size of the steel is refined.
• It prepares the steel for further heat treatment.
• It produces specific microstructure. 

Advantages of burnishing process

Burnishing is a cold process in which plastic deformation takes place by applying pressure on metallic surfaces through a ball or roller. This process is mainly used for completion and reinforcement. Let us have a deep insight into the advantages provided by the burnishing process. 

Advantages of the burnishing process :

• It improves revolution size and finishes such as cylinders and conical surfaces.
• Possible to burn internal and external surfaces.
• Improves the hardness of the surface.
• Increases wear resistance and decrease fatigue and fight corrosion.
• It also eliminates the processes of grinding and honing that can be expensive.
• Mirror finish in one pass and accurate sizing, close tolerance and eliminate lapping and honing process too. 
• Long tool life and no operator skill required. 
• Machining time is short. 

Explore more information: 

1. What is the burnishing process?

Advantages of CRDI system | Benefits of CRDI engine

Cars equipped with CRDI technology provide 25% more power and torque than the normal direct injection engine. There are some more advantages to cars with the use of CRDI system. Let us have a deep insight into the advantages provide by CRDI system in this article. 

Advantages of CDRI system: 

• Improved power, increased fuel efficiency and reduced noise and vibration.
• Doubling the torque at lower speeds.
• Gives High efficiency due to variable injection time.
• Gives better pulverization of fuel.
• Increased combustion capacity.
• Precise injection timing.
• Very high injection pressure and better stability.
• Increased combustion quality due to pilot and post-injection.
• Reduced smoke, particulates and exhaust. 
• Offers superior pickup.
• Higher mileage.
• Lower emission and fuel combustion.
• Reduce noise and vibration. 
• Reduce smoke, particulates and exhaust. 
• It can control the flow of fuel with the load and speed of the engine.
• This system requires only one fuel pump for multiple cylinders. 

The main disadvantages of this system is that increase the initial cost and the maintenance of the engine.