While using lathe machine a safety must be needed to avoid an accident.
When we use a lathe, the following things must take great care.
When we use a lathe, the following things must take great care.
- Do not support the work piece by hand use work holding device.
- Instead of using hand use brush to clean the chip.
- No adjustment while the machine is operating.
- Do not measure to attempt revolving parts.
- Make sure that all parts are secured tightly in the lathe before starting the operation.
- Never place tools on the drilling table.
- Wear safety goggles and avoid loose clothing.
- Don't keep a chuck handle attached by the chuck. Next, it flies at the moment of turning a lathe.
- Don't touch the byte table into the rotating chuck. Not only a byte but the table or the lathe are damaged.